We had a wonderful time.

Aug 16, Please see an updated video I made on this topic - Check my channel!Jeep Grand Cherokee - How to remove Jeep ZJ control arm bushings without burning the. May 09, In this video I will show you how to replace upper and lower control arms in your Jeeps front axle. This process is very similar to other vehicle models but.

American auto manufacturers went all out to create the fastest drag muscle cars they could.

Nov 25, Re: Removing control arm bushings (axle side) You can use a peice of threaded rod with a washer the same size as outer sleeve and a cup or large socket to receive the bushing into.

That may be a more humane way. Feb 01, Drilled out the rubber bushing going around the perimeter of the bushing with a 1/2" drill, then carefully cut the metal sleeve (part of the bushing) with a sawzall. Bushings popped out.

Hawley says many control arm assemblies wear down every 90, to, miles.

To install them, the socket/vice didn't work for that treedelimbing.barted Reading Time: 8 mins. Nov 16, Please like and subscribe!

Love hearing your comments!Skip to to see tips on installing a new bushingSkip to to skip the explanation and get right Missing: jeep xj. Jun 19, Remove two bolts, pop off arm, install new arm, reinstall bolts, and then move on to the next arm. You will need 21mm socket for the lower arms and 15mm for uppers. If the bolt holes aren't lining up when you reinstall the bolts, use your bottle jack or rachet straps to push the axle in place.